PRINTED ONTO HEAVYWEIGHT 550gsm FIRE-RATED PVC (NOT SEE THROUGH
POLYPROPYLENE)

850MM WIDE – BETTER VALUE THAN 800MM WIDE BUDGET ALTERNATIVES

If you are searching for a bargain then look no further than our Budget Roller Banner Stand. To
our knowledge no other UK based company is offering a comparable quality banner stand at a
price anywhere near our own, in fact expect to pay double this price for a similar product from our
competitors!

Our budget banner stand is made from a heavier grade Aluminium than many low cost, budget
banner stands but is still light to carry & weighs less than 5KG. This is the only banner cassette we
will provide in the lower price bracket as the majority of other makes (and we have access to them
all) are made from flimsy aluminum. These banner stands are superb value for money.

The price includes a padded carry bag and a photographic quality graphic printed onto a 500gsm
PVC banner material. Our print is guaranteed to sit perfectly flat with no edge curl.

The Quickroll Pro is a sleek, wide based roller banner stand.

The wide profile base of this stand means that the twist out feet found on lower cost banner stands
are not required. Another great feature of this stand is that the casing of the base can be opened
and the roller removed and replaced. You can purchase new prints pre-loaded onto a new roller for
far less than the price of a new stand.

2000 x 850mm visible graphic area (add 200mm to allow for roller)

Sturdy but light enough for easy transport – 5KG weight

Sleek, designer styling

Adjustable feet on base compensate for uneven floors

Slideon/off toprail for easy graphic change

Available in Silver Anodised finish

Includes padded carry bag

Our price incudes the highest quality photographic printing. We use a tear resistant 125micron
Opal Jet stoplight film and your prints are supplied overlaminated as standard with a durable,
scratch resistant finish film at no additional cost. Please click the ‘artwork templates’ button below
to download detailed artwork setup information for this product along with ready-made artwork
templates for your designer in some of the most popular design packages.

Stylish design and proven reliability makes Barracuda a popular quality banner stand. Barracuda
is the most feature-rich single-sided roller banner available and has been specially designed for
maximum convenience and ease of use.

2130mm max high x 800 or 1000mm wide visible graphic area

Available in anodised silver

Charcoal grey end caps

Secure slide in graphic system

Ratchet tensioner

Twist & lock telescopic pole

Supplied with quality foam padded carry bag

Please note the Barracuda banner stand was upgraded and re-modelled in Jan 2007. This is the
new model, old stock is still available on request

Our price incudes the highest quality photographic printing. We use a tear resistant 125micron
Opal Jet stoplight film and your prints are supplied overlaminated as standard with a durable,
scratch resistant finish film at no additional cost. Please click the ‘artwork templates’ button below
to download detailed artwork setup information for this product along with ready-made artwork
templates for your designer in some of the most popular design packages.

A small, quiet 3W, 12V motor in the base of the unit enables your graphic to be looped and
smoothly revolve continuously.

A drawback with many motorised units from other suppliers is that they require a nearby power
supply and innevitably you need to run unsightly cables from the plug socket to the stand. With this
stand however you have the option of using either mains power or alternatively running from the
included rechargeable battery pack. Running off the power pack will give up to 15 hours continuous
use, additional battery packs are also available.

The whole unit packs down into a very sturdy aluminium flight case for easy transport.
Graphics for this stand are printed onto a lightweight textile fabric.

Specifications

Height is adjustable from 1000mm to 1900mm (viewable)

Width is 780mm

Runs from mains power or included rechargeable battery pack

Packs away into sturdy aluminium flight case

Graphics

Printed onto durable textile banner fabric at photo quality

Print set up size 780mm wide x 2000mm – 3800mm tall

Print is looped so allow 20mm at top of print for overlap

3×3 Curved Ultima Pop Up Exhibition Display Stand

2 x Quickroll Lite Banner Stands

Luxury Transit Case

Deluxe Table Top For Case (in Beech or Granite Finish)

Choice of Z-Up or Media Compact 4 Literature Rack

Pair of Halogen Floodlights

All Printing of pop up, banners and case in photographic quality – using Opal Jet polyester
stoplight with scratch resistant overlaminate

Specifications

Complete weight of kit – aprox 40kg

Print

Graphics output onto Opal Jet stoplight polyester with crystal, scratch resistant overlaminate

Artwork Set Up Size For Pop Up – 3365mm wide x 2225mm tall

Artwork Set Up for Case Wrap Panel – 1860mm wide x 800mm tall

Artwork Set Up for Banner Stands – 850mm wide x 2150mm tall
All prices are plus vat, turnaround is usually within 5 working days and all prices are based on artwork being provided in the relevant format. If you require us to produce your artwork then please contact us for a quote.

The telescopic pole extends to over 5M high so you can be sure to get your message accross and
assembly is straight forward, taking a matter of minutes.

The unit splits down into sections for easy transportation and storage, with a 4-part hollow base
that can be filled with sand or water for extra stability.

Specifications

Telescopic pole extends up to 5 Metres tall

Portable and lightweight

Water filled base for stability

Aluminium pole with moulded plastic base

Optional carry bag available

Print Details

1000mm x 3500mm (smaller prints available on request)

Printed onto heavyweight PVC on one side

Can be supplied double sided at extra cost

This material is durable and can be used outdoors in all weather

Photographic, full colour quality reproduction

UV curable inks are waterproof, scratch resistant and will not fade

Guarantee

This product is covered by a manufacturers 10 Year guarantee against component failure and
defects. Our print work is guaranteed for 1 Year.

The Hurricane’s moulded base can be filled with either water or sand to provide stability in adverse
weather conditions.

Specifications

Single sided banner stand

Ideal for point of sale, retail display or exhibition environments

Hollow plastic base for water or sand weighting

Graphic supported on simple eyelet system

Weather resistant

Optional carry bag available

Visible graphic size 2100mm high x 800mm wide approx

Print Details

800mm wide x 2100mm high

Printed onto heavyweight PVC

This material is durable and can be used outdoors in all weather

Photographic, full colour quality reproduction

UV curable inks are waterproof, scratch resistant and will not fade

Your banner is despatched inside a suitable tube for transport, optional re-useable tube available

Guarantee

This product is covered by a manufacturers 10 Year guarantee against component failure and
defects. Our print work is guaranteed for 1 Year.

Specifications

Indoor or outdoor use

Single or double sided

2 frame sizes available (1M x 2.5M or 1.25M x 3M) – price shown based on 1M x 2,5M size

Natural finish 25mm (1”) square aluminium tubes with reinforced plastic mouldings

Esy push-fit assembly, no tools required

Graphics are secured to the frame with elastic bungee cords

Carry bag included

Optional carry bag for banner available

Flat packs for easy transportation

Print Details

2340mm x 840mm or 2840mm x 1090mm

Printed onto heavyweight PVC or Mesh material (allows wind to pass-through)

This material is durable and can be used outdoors in all weather

Photographic, full colour quality reproduction

UV curable inks are waterproof, scratch resistant and will not fade

Guarantee

This product is covered by a manufacturers 10 Year guarantee against component failure and
defects. Our print work is guaranteed for 1 Year.

Itss the ideal promotional solution for outdoor events, advertisments, exhibitions and public areas
such as airports and shopping centres. Several Horizon stands can be linked together to create a
massive wall for even bigger impact.

Specifications

Indoor or outdoor use

Single or double sided

Telescopic poles for adjustable height

Individual units can be linked together

Hollow bases can be filled with sand or water for greater stability

Quick to assemble

Optional carry bag available

Print Details

Standard size 2M high x 2.5M wide- custom sizes can be printed

Printed onto heavyweight PVC or Mesh material (allows wind to pass-through)

This material is durable and can be used outdoors in all weather

Photographic, full colour quality reproduction

UV curable inks are waterproof, scratch resistant and will not fade

Guarantee

This product is covered by a manufacturers 10 Year guarantee against component failure and
defects. Our print work is guaranteed for 1 Year.

All prices are plus vat, turnaround is usually within 5 working days and all prices are based on artwork being provided in the relevant format. If you require us to produce your artwork then please contact us for a quote.